This is one hot cake by Fusion Body Art! Fire Flames packs a fiery punch for all of you dragons, flaming sports balls, tiger lilies, race cars, hearts, phoenixes and so much more. Fire Flames is a must have colour combo in your kit and you will be surprised how often you will reach for it!
Prime Strong Black, Prime Cardinal Red, Prime Orange Zest, Prime Bright Yellow
How to Apply
Fusion Body Art’s split cakes just require a flat face painting brush and water to get started. For flowing cheek art designs use a 1” flat brush to load all of the colours in the split cake or use smaller flat brushes to just pick up a few of the colours. Make sure to start with a slightly damp brush and add more water as needed by just dipping one corner of the brush lightly into your water. If you are new to 1 stroke face painting, the internet is filled with tons of amazing 1 stroke design ideas to inspire you. This method of face painting will save you a lot of time, and it will impress your clients as they watch these beautiful Fusion Body Art colours flow off your brush at the same time. You can also load your split cakes with small face painting sponges or round daubers. When using sponge, dab the colours onto the skin where you would like them, gently patting back and forth until all of the colours are even and bold.
Fusion Body Art Face Paint is fast and easy to apply with a wet paint brush or sponge. Fusion Face Paints can be easily removed with soap and water loaded onto a soft cloth or sponge. Fusion Body Art Face paint colours contain only high-quality FDA and EU compliant skin safe pigments and ingredients that are gentle on the skin. Each colour has been carefully developed to give you the brightest and most opaque colors for your makeup designs. Fusion Body Art Face Paints dry quickly, and once dry have a smudge resistant finish. You can layer colours on top of each other once the base colour is dry, and you can blend Fusion Body Art Face Paints while they are still wet to make endless beautiful shades.
About our Ingredients
Fusion Face and Body Paints are made in China under the direction of the owners of Fusion Body Art, which is based in Australia. All FD&C and D&C pigments are manufactured in the USA, guaranteeing that only the safest pigments make it into Fusion Body Art. Fusion paints are paraben free and are not made from animal biproducts or tested on animals. Store Fusion Body Art Paints in a dry location away from extreme heat, humidity or cold. Use paint within 12 months from opening to ensure freshness.
✓ Vegan Friendly ✓ Not Tested on Animals ✓ Gluten Free ✓ Perfume Free ✓ Paraben Free
PRODUCT LABEL & INFORMATION
Add water to your brush before you apply it to the skin. Wash with soap and water, some colours may stain skin temporarily. Keep lids closed when not in use. All cosmetics can, on rare occasions cause allergic reactions. Do not apply to sensitive or broken skin. Test by placing a small amount to the wrist, if reaction occurs within 30 minutes discontinue use. FDA recommends not to use Pink Sorbet, Magic Magenta, Royal Purple and Fresh Lilac around the eye area. Use within 12 months of opening.
Not tested on Animals. Vegan Friendly. Glutten Free. Perfume Free. Paraben Free. Because this product can stain other surfaces, please avoid contact with carpets, fabrics and upholstery.
Size: 30 grams
Jar Dimensions: 52mm L x 15.8mm W x 6.3mm H
*Product images are for illustrative purposes only and may differ slightly from the actual product. Due to differences in monitors, colours of products may also appear different to those shown on the site.
*Due to the manufacturing process not all colours will be equal in each Split Cake.
For more updates and ideas of how to use Fusion paints, check out their Instagram.
Calcium Carbonate, Acacia Senegal Gum, Glycerin, Polyvinylpyrrolidone, PEG-32, Water (Aqua), may contain: Iron Oxides (1332-37-2)(CI77491), Titanium Dioxide (CI77891), FD&C Yellow 5 (CI19140), FD&C Red 40 (CI16035), FD&C Blue 1 (CI42090), Ultramarines (CI77007), D&C Red 7(CI15850), Mica (CI77019), Aluminum Powder (CI 77000)
Conforms to (EC) No. 1223/2009. FDA and EU Compliant. Made in China.